91
This cordless handset is set up to comply with the energy-conserving standards
right out of box. These instructions are intended for California Energy Commission
(CEC) compliance testing only. When the CEC battery charging testing mode is
activated, all telephone functions, except battery charging, will be disabled.
To activate the CEC battery charging testing mode:
1. On the CM18445 console, press MENU/SELECT.
2. Press or to scroll to Registration, then press MENU/SELECT or /SKIP.
3. Press or to scroll to Deregistration, then press MENU/SELECT or /SKIP.
4. Press or to choose this handset, then press MENU/SELECT or /SKIP.
5. Press or to scroll to Yes, then press MENU/SELECT or /SKIP. The
console shows Deregistering Handset X (X represents the extension number).
The process takes up to 10 seconds to complete. When the handset
successfully enters the CEC battery charging testing mode, its screen displays
1) Press MENU on Console ->Registration ->Register Ext. 2) Press # on this
extension to register. You hear a confirmation tone.
If the handset fails to enter this mode, repeat all the steps above.
To deactivate the CEC battery charging testing mode:
Register your handset back to the CM18445 console. See Add and register a
handset on page 8 for the instructions.
Appendix
California Energy Commission battery charging
testing instructions
To Next Page
Loading...
Need help?
General
