VTech CM18045 User Manual

25
Telephone settings
Telephone setup
Hold reminder
When the handset holds an outside call or an intercom call for
more than three minutes, it gives you a double beep every
30 seconds. You can set its volume to one of six levels or turn the
reminder off.
1. When the handset is idle, press MENU/SELECT.
2. Press DIR or CID to scroll to Handset setup, then press
MENU/SELECT or Select.
3. Press DIR or CID to scroll to Hold reminder, then press
MENU/SELECT or Select.
4. Press DIR, CID or -/VOLUME/+ on the handset to adjust the
beep volume.
5. Press MENU/SELECT or Save to save the setting and return to
the previous menu. You hear a confirmation tone. To exit without
making changes, press OFF/CANCEL or Back.
Handset name
Use this feature to rename the handset.
1. When the handset is idle, press MENU/SELECT.
2. Press DIR or CID to scroll to Handset setup, then press
MENU/SELECT or Select.
3. Press DIR or CID to scroll to Handset name, then press
MENU/SELECT or Select.
4. Use the dialing keys to change the name (up to 10 characters).
• Press DIR or CID to move the cursor left or right.
• Press MUTE/DELETE to delete a character.
• Press and hold MUTE/DELETE to delete all characters.
5. Press MENU/SELECT or Save to save the setting and return to
the previous menu. You hear a confirmation tone. To exit without
making changes, press OFF/CANCEL or Back.

VTech CM18045 Specifications

General

Brand	VTech
Model	CM18045
Category	Telephone
Language	English