24
Telephone settings
Telephone setup
Primary line
Use this feature, also known as automatic line selection, to choose
which line is automatically selected each time you make an
outside call. If you select Auto, the handset picks up any available
line starting from Line 1.
1. When the handset is idle, press MENU/SELECT.
2. Press DIR or CID to scroll to Handset setup, then press
MENU/SELECT or Select.
3. Press DIR or CID to scroll to Primary line, then press
MENU/SELECT or Select.
4. Press DIR or CID to scroll to a desired line.
5. Press MENU/SELECT or Select to save the setting and return to
the previous menu. You hear a confirmation tone. To exit without
making changes, press OFF/CANCEL or Back.
Call privacy
The call privacy is set to Off by default. The handset allows other
extensions to join a call in progress. You can turn this setting on to
ensure that only one device uses a line at a time.
1. When the handset is idle, press MENU/SELECT.
2. Press DIR or CID to scroll to Handset setup, then press
MENU/SELECT or Select.
3. Press DIR or CID to scroll to Call privacy, then press
MENU/SELECT or Select.
4. Press DIR or CID to scroll to On or Off.
5. Press MENU/SELECT or Select to save the setting and return to
the previous menu. You hear a confirmation tone. To exit without
making changes, press OFF/CANCEL or Back.
NOTE: To temporarily change the call privacy setting during a call, see
page 31.
To Next Page
Loading...
Need help?
General
