64
Answering system
Private mailbox setup
Remote access code
Use this code to select a three-digit number to allow remote
access of the answering system from another telephone. You can
change the code to any number from 000-999. This code is 000 by
default.
1. When the handset is idle, press M.Box.
2. Press DIR or CID to scroll to Settings, then press
MENU/SELECT or Select.
3. Press MENU/SELECT or Select to choose Remote access.
4. Use the dialing keys to enter a three-digit remote code.
• Press MUTE/DELETE to delete a digit.
• Press DIR or CID to move the cursor to the left or right.
5. Press MENU/SELECT or Save to save the setting and return to the
previous menu.
Message Length
Use this feature to set the maximum length of each recorded
message. The caller can record a message up to that specific time
period.
1. When the handset is idle, press M.Box.
2. Press DIR or CID to scroll to Settings, then press
MENU/SELECT or Select.
3. Press DIR or CID to scroll to Message length, then press
MENU/SELECT or Select.
4. Press DIR or CID to scroll to 1 minute, 2 minutes or
3 minutes.
5. Press MENU/SELECT or Select to save the setting and return to
the previous menu.
To Next Page
Loading...
Need help?
General
