21
Telephone settings
Telephone setup
Ringer tone
Use this feature to choose one of the ten ringer tones. You can
choose different ringer tones for different lines so you can easily
identify which line is calling.
1. When the handset is idle, press MENU/SELECT.
2. Press DIR or CID to scroll to Ringer setting, then press
MENU/SELECT or Select.
3. Press DIR or CID to scroll to Ringer tone, then press
MENU/SELECT or Select.
4. Press DIR or CID to select the desired line (Line 1, Line 2,
Line 3 or Line 4), then press MENU/SELECT or Select.
5. Press DIR or CID to select a desired
ringer tone.
6. Press MENU/SELECT or Select to save the setting and return to
the previous menu. There is a confirmation tone. To exit without
making changes, press OFF/CANCEL or Back.
7. Repeat steps 4-6 above to choose ringer tones for other lines if
desired.
Do not disturb (DND)
Use this feature to silence your handset. When you activate the do
not disturb function, the icon and Do Not Disturb appear on the
handset screen. You will not receive any paging call and you will
not hear rings of incoming call or intercom call.
Instead, the LINE 1-LINE 4 indicator flashes to signal an incoming
call. If you receive an intercom call, the extension number of that
intercom call appears on the screen display.
1. In idle mode, press and hold DND to prevent interruptions. The
icon and Do Not Disturb appear on the screen.
2. In idle mode, press and hold DND again to resume normal call
alerts.
To Next Page
Loading...
Need help?
General
