Installation- and operating manual Handling device HP140T R09-2011
14/52
Product description
3.2 Function
3
3.2 Function
The linear motors of the two axles are controlled via amplifiers. High positional accuracy
and repeat accuracy is achieved by the integrated magnetic measuring system.
The positional accuracy describes the acceptable tolerance of the linear unit for an ope-
rating command involving movement to a specified position. It is determined by mechani-
cal tolerances and the accuracy of the measurement system. Furthermore, the positional
accuracy is influenced by external and internal temperature changes. The specified posi-
tional accuracy is attained for temperatures within a range of +/-15°C.
The repeat accuracy describes the acceptable tolerance of the linear unit for the repea-
ted approach to the same position, including repeated activation and deactivation. It is
influenced by external and internal temperature changes as well as by the mechanical
stop conditions for the referencing. The specified repeat accuracy is attained for a con-
stant temperature (+/-10°C) only and without any external loads.
3.3 Technical data
3.3.1 Scope of delivery
The scope of delivery of the machine depends on the order involved. Please refer to the
ordering information or order characteristics for individual components.
3.3.2 Sound level
The A-weighted emission sound pressure level do not exeed the allowable peak.
3.3.3 Ambient conditions and weight
Humidity 5 % to 95 %, non-condensing
Allowable temperature range
Storage: +5 °C to +55 °C
Operation: +15 °C to +45 °C
Environment
The HP140T must not be operated in environments
that contain abrasive dust
Protection class IP20
Weight
HP140 T with vertical stroke 65 mm: ca. 13 kg
HP140T with vertical stroke 100 mm: ca. 16 kg
i i i i i i i i i i i i i i i i i
i i i i i i i i i i i i i i i i i
i i i i i i i i i i i i i i i i i
i i i i i i i i i i i i i i i i i
To Next Page
Loading...
Need help?
General
