WEISS
Installation- and operating manual Handling device HP140T R09-2011
37/52
Operation
7.1 Safety during operation
7
7 Operation
7.1 Safety during operation
7.2 Operating the Pick & Place
The machine is designed for integration in other machines, in other incomplete machines
or equipment or for connection to these.
Safe operation and control are the responsibility of the operator.
7.3 Operating personnel workstations
The operating personnel workstations are determined by the operator of the plant or pro-
duct in which the machine is integrated.
Risk of injury due to incorrect alteration of operating parameters.
Operating parameters should only be changed by authorised persons. Altered operating
parameters should be checked in a test.
To Next Page
Loading...
Need help?
General
