5.2 Setting the Common Menus 123
[Print Priority]
[Printer Settings]
The [Printer Settings] menu allows you to set print density, paper trays, and the Auto Tray
Selection feature.
[Density]
System Settings
Print Priority
Setting Item Description
Print Priority Sets the print priority condition for Secure/Sample Print jobs. This setting is
valid only if [Interrupt Print] is set to [On].
• [Disable] (default)
Does not limit the number of pages of Secure/Sample Print jobs that can be
stored in the memory and gives them priority over other jobs. Interrupt
printing will not be performed unless the printer has sufficient memory to
store interrupt print jobs.
• [Enable]
Limits the number pages of Secure/Sample Print jobs that can be stored in
the memory to 3 pages to minimize the time used for interrupt printing.
Printer Settings
Density
Setting Item Description
Density Sets the print density.
• [Normal] (default)
Prints documents at standard density.
•[Darken +1]
Prints documents at slightly dark density.
•[Darken +2]
Prints documents at dark density.
• [Lighten +2]
Prints documents at light density.
• [Lighten +1]
Prints documents at slightly light density.
To Next Page
Loading...
Need help?
General