5.2 Setting the Common Menus 127
[Tray Priority]
[Paper Size]
Printer Settings
Tray Priority
Tray Priority
1st
Tray Priority
2nd
Tray Priority
3rd
Setting Item Description
1st to 3rd Sets the priority order of the paper trays. This setting will be used by the Auto
Tray Selection feature. You cannot assign a priority order to the bypass tray.
• [Tray 1] to [Tray 4]
Sets the priority order of the paper trays. By default, the priority order of the
trays are:
tray 1, tray 2, tray 3, and tray 4.
Note
• You cannot assign the same priority to more than one tray. The [2nd] tray
must be a tray other than the [1st] tray, and the [3rd] tray must be a tray other
than the [1st] and [2nd] trays. The remaining tray will be the [4th] tray.
• [Tray Priority] appears only when the optional sheet feeders are installed.
Printer Settings
Paper Size
Paper Size
Tray 1 8.5x11*
Paper Size
Tray 2 8.5x11*
Paper Size
Tray 3 8.5x11*
Paper Size
Tray 4 8.5x11*
Paper Size
Bypass Driver*
Setting Item Description
[Tray 1] to
[Tray 4]
Sets the paper size of the paper loaded in each paper tray.
• [11x17], [8.5x13], [8.5x14], [7.2x10.5], [5.5x8.5], [8.5x11] (default), [4.1x9.5],
[3.9x7.5], [110x220mm], [162x229mm], [100x148mm], [148x200mm],
[120x235mm], [105x235mm]
• [Custom]
Sets the length and width of the paper.
When [Custom] is selected, set the orientation of the paper to [Portrait (Y)] or
[Landscape (X)].
Note
• The display only shows the trays that are actually installed on the printer.
• For details on how to set custom paper sizes, refer to "Changing the Paper
Types of the Trays" (P. 89).
To Next Page
Loading...
Need help?
General