220 A Appendix
A.8 Installing the KR Font Kit
Installing KR font kit (optional) to the printer will allow you to use Myungio, Gothic, Round
Gothic, Graphic, Kungso, and Saemul fonts in PCL5 emulation.
WARNING
• This equipment has been designed to restrict operator access to safe areas only.
Operator access to hazardous areas is restricted with covers or guards, which would
require a tool to remove. Never remove these covers or guards.
Important
• Before plugging or unplugging the interface cable connector, be sure to switch off the printer or unplug
the power cord from the power outlet. Plugging or unplugging the connector when the printer is on can
cause printer failure.
Note
• For information about the PCL5 emulation feature, refer to the ‘PCL Emulation Setting Guide’ on the CD-
ROM supplied with the printer.
• The KR font kit cannot be installed simultaneously with other font kits or the PostScript software kit.
Checking the Package Contents
The packaging box contains the following item. If you find any item missing, please contact
our Customer Support Center or your dealers.
Important
• Do not touch the terminal area of the ROM.
• Do not bend or damage the ROM.
• Before touching the ROM, touch a metal surface to discharge any static electricity.
• Font ROM
To Next Page
Loading...
Need help?
General