Using the Operator Panel Menus and Keypad 160
• Adjust Altitude
Purpose:
To specify the altitude of the location where the printer is installed.
The discharge phenomenon for charging the photo conductor varies with barometric pressure.
Adjustments are performed by specifying the altitude of the location where the printer is being used.
NOTE:
• An incorrect altitude adjustment setting leads to poor printing quality, incorrect indication of remaining toner.
Values:
Secure Settings
Use the Secure Settings menu to set a password to limit access to the menus. This prevents
items from being changed accidentally.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
• Panel Lock
Purpose:
To restrict access to Admin Menu and Report / List with a password.
See also:
• "Panel Lock Function" on page 173
NOTE:
• You can select Disable for Panel Lock Set when all items under Service Lock are set to Unlocked.
Values:
0m* Specifies the altitude of the location where the printer is installed.
1000m
2000m
3000m
Panel Lock Set Disable* Does not restrict access to Admin Menu and Report /
List with a password.
Enable Restricts access to Admin Menu and Report / List with a
password.
Change
Password
0000*–9999 Sets or changes the password required to access Admin
Menu and Report / List.
To Next Page
Loading...
Need help?
General