Xerox DocuPrint CM205 b User Manual

217 Troubleshooting
 Entering Values
The Printer Setting Utility
Using the Printer Setting Utility, enter the values that you found in the color registration chart to make
adjustments.
The following procedure uses Windows XP as an example.
1 Click start  All Programs  Fuji Xerox  Fuji Xerox Printer Software for Asia-Pacific 
DocuPrint CM205 b
 Printer Setting Utility.
NOTE:
• The window to select a printer appears in this step, when multiple print drivers are installed on your
computer. In this case, click the name of the desired printer listed in Printer Name.
The Printer Setting Utility opens.
2 Click the Printer Maintenance tab.
3 Select Registration Adjustment from the list at the left side of the page.
The Registration Adjustment page is displayed.
4 Deselect the check box next to On.
5 Select the value you checked in the color registration chart, and then click the Apply New
Settings button.
6 Click the Start button next to Print Color Regi Chart.
The color registration chart is printed with the new values.
7 Adjust until all straight lines are at the value of 0. Show image of before and after adjustment will
help.
IMPORTANT:
• After printing the color registration chart, do not turn off the printer until the printer motor has stopped running.
• If 0 is not next to the straightest lines, determine the values and adjust the printer again.

Xerox DocuPrint CM205 b Specifications

General

Brand	Xerox
Model	DocuPrint CM205 b
Category	Printer
Language	English