Printing Basics 74
Loading Print Media in the Multipurpose Feeder (MPF)
NOTE:
• To avoid paper jams, do not remove the priority sheet inserter (PSI) while printing is in progress.
• Use only laser print media. Do not use ink jet paper in this printer.
1 Open the front cover.
NOTE:
• When you use the MPF for the first time, open the front cover by pulling out the instruction sheet.
2 Pull the PSI out.
NOTE:
• When you use the MPF for the first time, remove the instruction sheet attached to the PSI with adhesive
tape.
To Next Page
Loading...
Need help?
General