61 Installing the Print Driver
Installing the Drivers and Software
The following procedure uses Mac OS X 10.6 as an example.
1 Run the Software Pack CD-ROM on the Mac OS X.
2 Double-click the FX DocuPrint CM205 b Installer icon.
3 Click Continue on the Introduction screen.
4 Select a language for the Software License Agreement.
5 After reading the Software License Agreement, click Continue.
6 If you agree to the terms of the Software License Agreement, click Agree to continue the
installation process.
7 Click Continue if Select a Destination screen appears.
8 Click Install to perform the standard installation.
9 Enter the administrator's name and password, and then click OK.
10 Click Continue Installation.
11 Click Restart to complete installation.
Adding a Printer on Mac OS X 10.5/10.6
1 Turn off the printer and your computer.
2 Connect the printer and your computer with the USB cable.
3 Turn on the printer and your computer.
4 Display System Preferences, and then click Print & Fax.
5 Confirm your USB printer is added to Print & Fax.
If your USB printer is not displayed, execute the following procedures.
6 Click the plus (+) sign, and then click Default.
7 Select the printer connected via USB from the Printer Name list.
Name, Location, and Print Using are automatically entered.
8 Click Add.
To Next Page
Loading...
Need help?
General