165 Using the Operator Panel Menus and Keypad
• Color Balance G
Purpose:
To specify the default color balance level of green within the range of -2 to +2. The factory default
menu setting is 0.
• Color Balance B
Purpose:
To specify the default color balance level of blue within the range of -2 to +2. The factory default menu
setting is 0.
• Gray Balance
Purpose:
To specify the default gray balance level within the range of -2 to +2. The factory default menu setting
is 0.
NOTE:
• This option is effective only for black and white copying.
•N-Up
Purpose:
To print two original pages to fit onto one sheet of paper.
Values:
• Margin Top/Bottom
Purpose:
To specify the value of the top and bottom margins.
Values:
• Margin Left/Right
Purpose:
To specify the value of the left and right margins.
Values:
Off* Does not perform N-Up printing.
Auto Automatically reduces the original pages to fit onto one sheet of
paper.
ID Copy Prints the original pages onto one sheet of paper in the original size.
Manual Prints the original pages onto the one sheet of paper in the size
specified in Reduce/Enlarge.
4mm*/0.2 inch* Specify the value in increments of 1 mm/0.1 inch.
0-50mm/0.0-2.0 inch
4mm*/0.2 inch* Specify the value in increments of 1 mm/0.1 inch.
0-50mm/0.0-2.0 inch
To Next Page
Loading...
Need help?
General