Xerox Phaser 3330 Service Manual

Image Quality
Phaser 3330 and WorkCentre 3335/3345 Xerox Internal Use Only
Service Manual
3-24
Printing the Test Pattern
To print a Test Pattern, the printer must be in Service Mode. For additional information on Service
Mode, see Service Mode Introduction.
Entering the Phaser 3330 Service Mode
1. Enter Service Mode (P3330).
2. Scroll down to Printer Routines and press OK.
3. Scroll to dC612 Test Pattern and press OK.
4. Scroll to Test Patter n 1 or Te s t Pa t tern 2 and press OK.
5. Select quantity and press OK.
6. Select Yes and press OK.
Entering the WorkCentre 3335/3345 Service Mode
1. Enter Service Mode (WC3335/3345).
2. Select Copier Diagnostics.
3. Select dC612 Test Patterns.
4. From the pull-down, select S600 Pattern (A4 or 8 1/2 by11).
5. Select quantity.
6. Press Start.

Xerox Phaser 3330 Specifications

General

Brand	Xerox
Model	Phaser 3330
Category	Printer
Language	English