Xerox Phaser 3330 Service Manual

Service Parts Disassembly
Phaser 3330 and WorkCentre 3335/3345 Xerox Internal Use Only
Service Manual
4-86
14. Disengage the boss and remove the Lower CRUM Holder (Parts List 3.1 Frame (1 of 2), PL 3.1.12).
SMPS Fan
Note: SMPS Fan is present in 110V models only.
Parts List 3.1A Frame (2 of 2)
WARNING: Do not perform repair activities with the power on or electrical power supplied to the
machine. The machine could activate and cause serious personal injury when the power is on or
electrical power is supplied.
1. Do steps 1-4 in the Preparation section (page 4-3).
2. Undock the printer from the optional Tray 2 Base. (page 4-8).
3. Remove the Scanner Assembly, WorkCentre 3335/3345, (page 4-103).
4. Remove Right Cover (page 4-17).
5. Remove the Control Panel, Phaser 3330 only, (page 4-70).
s3320-180

Xerox Phaser 3330 Specifications

General

Brand	Xerox
Model	Phaser 3330
Category	Printer
Language	English