Xerox Phaser 3330 Service Manual

Service Parts Disassembly
Xerox Internal Use Only Phaser 3330 and WorkCentre 3335/3345
Service Manual
4-25
Lower Middle Cover (3335/3345)
Parts List 6.1 WorkCentre 3335/3345 Main
WARNING: Do not perform repair activities with the power on or electrical power supplied to the
machine. The machine could activate and cause serious personal injury when the power is on or
electrical power is supplied.
1. Do steps 1-4 in the Preparation section (page 4-3)
2. If necessary, remove the Printer from the optional Tray 2 Base and set the printer on a flat work
surface (page 4-8).
3. Remove the ADF/DADF (WorkCentre 3335, (page 4-138); WorkCentre 3345, (page 4-116).
4. Remove the Front Door (page 4-13).
5. Remove the Rear Door (page 4-13).
6. Remove the Left Cover (page 4-15).
7. Remove the Right Cover (page 4-17).
8. Remove the Scanner Assembly (page 4-103)
9. Remove the Upper Middle Cover (page 4-23)

Xerox Phaser 3330 Specifications

General

Brand	Xerox
Model	Phaser 3330
Category	Printer
Language	English