Xerox Phaser 3330 Service Manual

Service Parts Disassembly
Phaser 3330 and WorkCentre 3335/3345 Xerox Internal Use Only
Service Manual
4-58
Main Drive
Main Drive Assembly
Parts List 3.5 Drive
WARNING: Do not perform repair activities with the power on or electrical power supplied to the
machine. The machine could activate and cause serious personal injury when the power is on or
electrical power is supplied.
1. Do steps 1-4 in the Preparation section (page 4-3).
2. Undock the printer from the optional Tray 2 Base. (page 4-8).
3. Remove the Exit Roller Frame (page 4-55).
4. Remove the Front Door (page 4-13)
5. Remove the Left Side Cover (page 4-15).
6. Remove the Rear Door (page 4-13).
7. Slide the Coupler Bar towards the front of the printer until it releases from the guides in the Feed
Drive Assembly.
8. Rotate the Coupler Bar and release it from the Cam Coupler.
s3320-058

Xerox Phaser 3330 Specifications

General

Brand	Xerox
Model	Phaser 3330
Category	Printer
Language	English