Xerox Phaser 3330 Service Manual

Service Parts Disassembly
Phaser 3330 and WorkCentre 3335/3345 Xerox Internal Use Only
Service Manual
4-72
Note: When installing the LCD, there is a copper colored Ribbon Cable that connects the PBA SUB
to the OPE Joint. Be sure that this cable is fully installed. A small pair of needle nose pliers may be
needed. No information will be displayed on the LCD is this cable is not completely seated. See
following picture.

Xerox Phaser 3330 Specifications

General

Brand	Xerox
Model	Phaser 3330
Category	Printer
Language	English