Maintenance
Phaser 6600 Color Printer 127
User Guide
1. At the printer control panel, press the Menu button.
Note: To navigate through the menu, use the Up or Down arrow buttons.
2. Navigate to Admin Settings, then press OK.
3. Navigate to Service Tools, then press OK.
4. Navigate to Color Reg Adjust, then press OK.
5. To have the printer perform an automatic color registration, navigate to Auto Correct, then
press OK.
6. At the Are you sure? prompt, press the Up or Down arrows to select Yes, then press OK.
7. To begin the calibration, press OK.
Performing a Manual Color Registration Adjustment
Color Registration adjusts the printer to make corrections to blurry or hazy prints, or prints with color
halos.
To perform a color registration adjustment:
1. At the printer control panel, press the Menu button.
Note: To navigate through the menu, use the Up or Down arrow buttons.
2. Navigate to Admin Settings, then press OK.
3. Navigate to Service Tools, then press OK.
4. To print a registration chart, navigate to Color Reg Chart, then press OK.
5. At the Are you sure? prompt, press the Up or Down arrows to select Yes, then press OK.
6. Starting with the left side calibration lines, circle the line in each group where the color bar aligns
with the adjacent black bars.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
