Xerox Phaser 6600 User Manual

Installation and Setup
Phaser 6600 Color Printer 63
User Guide
For example, you can set up the host access list to do the following:
• Accept printing from a specific network.
• Reject printing from a particular network mask within that network.
• Accept printing from one particular IP address within that network mask.
In this example, the access list would look like the following table:
Access List IP Address Address Mask Operation
1 192.168.200.10 255.255.255.255 Accept
2 192.168.200.0 255.255.255.0 Reject
3 192.168.0.0 255.255.0.0 Accept
To configure the Host Access List:
1. At your computer, open a Web browser, type the IP address of the printer in the address field,
then press Enter or Return.
2. In CentreWare Internet Services, click Properties.
3. In the Properties pane, to expand the menu, click the plus (+) symbol next to the Security folder.
4. Click Host Access List.
5. In the IP Address field, enter the IP address of the host as X.X. X.X, where X is a number from 0
through 255. For example, 192.168.200.10.
6. In the Address Mask field, enter the network mask for the host as X.X. X.X, where X is a number
from 0 through 255. For example, 255.255.255.255.
7. Under Operation, for the action the host takes with the IP address:
• Off indicates that this row of the access list is inactive. This setting lets you enter a specific
IP address or range of addresses before you plan to enforce the Accept or Reject operation.
• Accept allows the specified IP address or range of addresses access to the printer.
• Reject denies the specified IP address or range of addresses access to the printer.
8. Click Save Changes.
Configuring IPsec Settings
Use this page to enable IPsec on the printer. IPsec is a protocol suite used for securing Internet
Protocol (IP) communications by authenticating or encrypting each IP packet in a data stream. IPsec
also includes protocols for cryptographic key establishment. IPsec can be implemented as part of the
overall security policy of your company.
To configure IPsec Help:

Xerox Phaser 6600 Specifications

General

Color	Yes
Duplex printing	No
Print technology	Laser
Maximum resolution	600 x 600 DPI
Time to first page (black, normal)	9 s
Time to first page (color, normal)	10 s
Print speed (black, normal quality, A4/US Letter)	36 ppm
Maximum duty cycle	80000 pages per month
Number of print cartridges	-
Internal memory	256 MB
Processor frequency	533 MHz
Maximum internal memory	768 MB
Sound pressure level (printing)	53 dB
Total input capacity	700 sheets
Total output capacity	250 sheets
Paper tray media types	Card stock, Envelopes, Glossy paper, Labels
ISO A-series sizes (A0...A9)	A4
Standard interfaces	USB 2.0
USB 2.0 ports quantity	1
AC input frequency	50 - 60 Hz
Power consumption (standby)	65 W
Power consumption (printing)	535 W
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Weight	25500 g
Dimensions (WxDxH)	429.26 x 487.68 x 383.54 mm