Xerox Phaser 6600 User Manual

Maintenance
Phaser 6600 Color Printer 131
User Guide
1. At the printer control panel, press the Menu button.
Note: To navigate through the menu, use the Up or Down arrow buttons.
2. Navigate to Admin Settings, then press OK.
3. Navigate to Service Tools, then press OK.
4. Navigate to Reset Defaults, then press OK.
5. At the Are you sure? prompt, press the Up or Down arrows to select Yes, then press OK.
6. To return to Service Tools, press the Back arrow button, or to return to the main menu, press the
Menu button.
Initializing the Print Meter
The print meter records the total number of printed pages by user and paper size, and by total prints.
For each user, it also records the sheets printed by color, black only, and the total. To see the page
count since the last reset of the print meter, you can print the Print Volume Report from the
information pages. At the end of each accounting cycle, you can initialize the print meter to keep an
accurate accounting of the print volume by user.
To initialize the print meter:
1. At the printer control panel, press the Menu button.
Note: To navigate through the menu, use the Up or Down arrow buttons.
2. Navigate to Admin Settings, then press OK.
3. Navigate to Service Tools, then press OK.
4. Navigate to Init Print Meter, then press OK.
5. At the Are you sure? prompt, press the Up or Down arrows to select Yes, then press OK.
6. To return to Service Tools, press the Back arrow button, or to return to the main menu, press the
Menu button.
Resetting the Transfer Unit
The print meter keeps a count of the pages processed by the Transfer Unit. As the page count nears
the end of life for the transfer unit, a message appears to warn you to replace it soon. After the
transfer unit is replaced, reset the transfer unit so that the printer has an accurate page count for the
new unit.
To reset the transfer unit:
1. At the printer control panel, press the Menu button.
Note: To navigate through the menu, use the Up or Down arrow buttons.
2. Navigate to Admin Settings, then press OK.
3. Navigate to Service Tools, then press OK.
4. Navigate to Reset Trans Unit, then press OK.
5. At the Are you sure? prompt, press the Up or Down arrows to select Yes, then press OK.
6. To return to Service Tools, press the Back arrow button, or to return to the main menu, press the
Menu button.

Xerox Phaser 6600 Specifications

General

Color	Yes
Duplex printing	No
Print technology	Laser
Maximum resolution	600 x 600 DPI
Time to first page (black, normal)	9 s
Time to first page (color, normal)	10 s
Print speed (black, normal quality, A4/US Letter)	36 ppm
Maximum duty cycle	80000 pages per month
Number of print cartridges	-
Internal memory	256 MB
Processor frequency	533 MHz
Maximum internal memory	768 MB
Sound pressure level (printing)	53 dB
Total input capacity	700 sheets
Total output capacity	250 sheets
Paper tray media types	Card stock, Envelopes, Glossy paper, Labels
ISO A-series sizes (A0...A9)	A4
Standard interfaces	USB 2.0
USB 2.0 ports quantity	1
AC input frequency	50 - 60 Hz
Power consumption (standby)	65 W
Power consumption (printing)	535 W
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Weight	25500 g
Dimensions (WxDxH)	429.26 x 487.68 x 383.54 mm