Xerox Phaser 6600 User Manual

Installation and Setup
Phaser 6600 Color Printer 81
User Guide
b. On the printer control panel, do one of the following for the IP address:
• Allow the printer to set up a DHCP address.
• Enter the IP address manually.
c. Print the Configuration Report and keep it for reference. For details, see Configuration
Report on page 25.
2. At your computer, do the following:
a. Go to www.xerox.com/office/6600drivers and select your printer model.
b. From the Operating System menu, select UNIX, then click Go.
c. Select the Xerox
®
Services for UNIX Systems package for the correct operating system.
This package is the core package and must be installed before the printer support package.
d. To begin downloading, click the Start button.
e. Repeat steps a and b, then click the printer package for use with the Xerox
®
Services for
UNIX Systems package that you selected earlier. The second part of the driver package is
ready for download.
f. To begin downloading, click the Start button.
g. In the notes below the driver package that you selected, click the link for the Installation
Guide, then follow the installation instructions.
Notes:
• To load Linux print drivers, perform the preceding procedures but select Linux as the
operating system. Select Xerox
®
Services for Linux Systems driver or the Linux CUPS
Printing Package. You can also use the CUPS driver included in the Linux package.
• Supported Linux drivers are available at www.xerox.com/office/6600drivers.
• For details about UNIX and Linux drivers, see the System Administrator Guide at
www.xerox.com/office/6600docs.
Other Drivers
The following drivers are available for download at www.xerox.com/office/6600drivers.
• The Xerox
®
Global Print Driver works with any printer on your network, including those printers
made by other manufacturers. It configures itself for your individual printer upon installation.
• The Xerox
®
Mobile Express Driver works with any printer available to your computer that
supports standard PostScript. It configures itself for the printer you select every time you print. If
you travel frequently to the same sites, you can save your favorite printers in that location and
the driver saves your settings.
Installing the Printer as a Web Service on Devices
Web Services on Devices (WSD) allow a client to discover and access a remote device and its
associated services across a network. WSD supports device discovery, control, and use.
To install a WSD printer using the Add Device Wizard:

Xerox Phaser 6600 Specifications

General

Color	Yes
Duplex printing	No
Print technology	Laser
Maximum resolution	600 x 600 DPI
Time to first page (black, normal)	9 s
Time to first page (color, normal)	10 s
Print speed (black, normal quality, A4/US Letter)	36 ppm
Maximum duty cycle	80000 pages per month
Number of print cartridges	-
Internal memory	256 MB
Processor frequency	533 MHz
Maximum internal memory	768 MB
Sound pressure level (printing)	53 dB
Total input capacity	700 sheets
Total output capacity	250 sheets
Paper tray media types	Card stock, Envelopes, Glossy paper, Labels
ISO A-series sizes (A0...A9)	A4
Standard interfaces	USB 2.0
USB 2.0 ports quantity	1
AC input frequency	50 - 60 Hz
Power consumption (standby)	65 W
Power consumption (printing)	535 W
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Weight	25500 g
Dimensions (WxDxH)	429.26 x 487.68 x 383.54 mm