Adding Individual and Group Speed Dial Entries
Phaser® 8510/8560MFP Multifunction Product
6-8
Adding a Group
Set up and save group names to easily access them when you want to send a fax to a group.
Groups can include both individual and group entries once they have been set up.
Note: Individual entries must be set up before groups can be defined.
Using the Control Panel
Use the control panel to add or remove individuals or groups from the speed dial group.
Setting Up a Group
To set up a group:
1. On the control panel, press the Speed Dial button.
2. Select
Group, and then press the OK button.
3. Select a blank number in the list displayed, and then press the OK button.
4. Using the alphanumeric keypad, enter a group name, and then press the OK button.
5. To add individuals to this group:
a. Select
Add Individual, and then press the OK button. This option appears when one
or more individuals can be added to this group.
b. Select an individual from the list displayed, and then press the OK button.
c. Repeat the above steps to continue adding individuals to the group.
6. To add a group to this group:
a. Select
Add Group, and then press the OK button. This option appears when one or
more groups can be added to this group.
b. Select a group from the list displayed, and then press the OK button.
c. Repeat the above steps to continue adding groups to the group.
7. When you have finished adding individuals and other groups, select
Done, and then press
the OK button.
To Next Page
Loading...
Need help?
General
