Xerox Phaser 8560MFP User Manual

Moving and Repacking the System
Phaser® 8510/8560MFP Multifunction Product
8-27
Preparing the System for Shipment
Before shipping the system:
1. Remove the maintenance kit and waste tray. See Removing the Maintenance Kit and
Waste Tray on page 8-28.
2. Turn off the system. See Turning Off the System on page 8-30.
3. Remove the document feeder and scanner. See Removing the Document Feeder and
Scanner on page 8-32.
4. Pack the system. See Packing the System on page 8-34.
Repack the system using the original packing material and boxes or a Xerox repackaging kit.
Additional instructions for repacking the system are provided in the repackaging kit. If you do
not have all the original packaging, or are unable to repackage the system, contact your local
Xerox service representative.
Caution: Damage to the system resulting from improper moving or failure to repackage the
system properly for shipment, is not covered by the warranty, service agreement, or Total
Satisfaction Guarantee. The Total Satisfaction Guarantee is available in the United States and
Canada. Coverage may vary outside these areas; please contact your local representative for
details.

Xerox Phaser 8560MFP Specifications

General

Brand	Xerox
Model	Phaser 8560MFP
Category	All in One Printer
Language	English