Managing Fax Functions
Phaser® 8510/8560MFP Multifunction Product
6-21
Enabling or Disabling Junk Fax Prevention
Junk fax prevention allows you to turn off/on printing faxes received from phone numbers in
the individual speed dial directory.
Using the Control Panel
To turn off/on the junk fax prevention option:
1. On the control panel, press the System button.
2. Select
Job Defaults Setup, and then press the OK button.
3. Select
Fax Defaults Setup, and then press the OK button.
4. Select
Fax Receive Setup, and then press the OK button.
5. Select
Junk Fax Prevention, and then press the OK button.
6. Select one of the following options, and then press the OK button:
■ Off: This option turns off the junk fax prevention option if it is on. Selecting Off
enables printing faxes from phone numbers in the individual speed dial directory.
■ On: This option turns on the junk fax prevention option if it is off. Selecting On
prevents printing faxes from phone numbers in the individual speed dial directory.
Using CentreWare IS
To turn off/on the junk fax prevention option:
1. Launch your web browser.
2. Enter your system’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).
3. Select the Properties tab, click to expand the Fax Settings folder, and then click Defaults.
4. In the Fax Receive Setup section, select an option in the Junk Fax Prevention field:
■ Off: This option turns off the junk fax prevention option if it is on. Selecting Off
enables printing faxes from phone numbers in the individual speed dial directory.
■ On: This option turns on the junk fax prevention option if it is off. Selecting On
prevents printing faxes from phone numbers in the individual speed dial directory.
5. When you are finished making your selection, click the Save Changes button.
To Next Page
Loading...
Need help?
General
