EasyManuals Logo
Home>Xerox>All in One Printer>WorkCentre 3315DN

Xerox WorkCentre 3315DN User Manual

Xerox WorkCentre 3315DN
262 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #189 background imageLoading...
Page #189 background image
Troubleshooting
Xerox WorkCentre 3315DN/3325DN/3325DNI
User Guide
189
Redistributing Toner
When the print cartridge is near the end of its life:
White streaks or light printing occurs.
Toner is Low. Order new one appears on the display.
If this happens, you can temporarily improve print quality by redistributing the remaining toner in the
cartridge. In some cases, white streaks or light printing will still occur even after you have redistributed
the toner.
1. Press the release latch on the left side of the machine.
2. Open the front door.
3. Pull the print cartridge out.
Orange Blinking A minor error has occurred and the machine is waiting
for the error to be corrected. Check the display
message. When the problem is resolved, the machine
resumes.
The print cartridge is near its estimated end of life.
Prepare a new cartridge for replacement. You may
temporarily increase the printing quality by
redistributing the toner - see Redistributing Toner on
page 189.
Wireless LED Blue On This is the default setting. Also shows blue when the
machine is connected to a wireless network.
LED Color Status Description
3
1
2
3

Table of Contents

Other manuals for Xerox WorkCentre 3315DN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox WorkCentre 3315DN and is the answer not in the manual?

Xerox WorkCentre 3315DN Specifications

General IconGeneral
BrandXerox
ModelWorkCentre 3315DN
CategoryAll in One Printer
LanguageEnglish

Related product manuals