Media Output Locations
Xerox WorkCentre 3315DN/3325DN/3325DNI
User Guide
44
To u s e t he output tray, make sure that the rear door is closed.
Notes:
• If paper coming out of the output tray has problems, such as excessive curl, try printing
to the rear door.
• To reduce paper jams, do not open or close the rear door while the printer is printing.
Using the Rear Door
When using the rear door, paper comes out of the machine
face up. Printing from the bypass tray to the rear door
provides a straight paper path and might improve the output
quality when printing on envelopes or special media.
Whenever the rear door is open, the output is delivered there.
Note: The rear door output can only be used for simplex
jobs. Duplex printing with the rear door open will cause
paper jams.
CAUTION: The fuser area inside the rear door of your
machine becomes very hot when in use. Take care when
you access this area.
To Next Page
Loading...
Need help?
General
