Xerox WorkCentre 4118 User Manual

Xerox WorkCentre 4118 System Administration Guide Page 2-1
2 Basic Network Installation
Introduction
This chapter explains how to make the basic settings to install the WorkCentre 4118 on a network.
The physical connection is Ethernet and the addressing protocols are provided by TCP/IP. The
following information is provided:
¾ Information Checklist. . . . . . . . . . . . . . . . . . . . . . . 2-2
¾ Ethernet Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
¾ Basic TCP/IP Settings . . . . . . . . . . . . . . . . . . . . . . 2-5

Xerox WorkCentre 4118 Specifications

General

Brand	Xerox
Model	WorkCentre 4118
Category	All in One Printer
Language	English