Page 8-6 Xerox WorkCentre 4118 System Administration Guide
Local Connection
Installing Windows Drivers
Before printing, scanning or using ControlCentre through the parallel port or the USB port
connected between the workstation and the
WorkCentre 4118, you will need to install a
driver.
The procedure will install the driver and configure it for the local port.
¾ Insert the Xerox Drivers CD into the CD drive.
Within a few seconds, the CD should start automatically and present you with the opening
screen. If this does not happen, go to the Star]t menu, choose [Run] and browse to the CD
drive. Select [Setup] and click [OK]. Click [OK] to start the installation procedure.
¾ When the language selection window appears, select the appropriate language.
¾ Choose the appropriate radio button for the hardware selected and then click [Next].
¾ Choose the components you want to install and then click [Next].
1
2
3
4
To Next Page
Loading...
Need help?
General
