Xerox WorkCentre 4118 User Manual

Page 4-12 Xerox WorkCentre 4118 System Administration Guide
Print Driver Installation for Networked Printers
Apple Mac OSX with AppleTalk
NOTE: These instructions assume the print driver is already installed.
To use AppleTalk, it must be enabled on your workstation and on the WorkCentre 4118. For
instructions on enabling AppleTalk on the WorkCentre 4118, refer to “Network
Communication Setup” on page 5-3.
Use the instructions below to add a printer with AppleTalk.
¾ Select Go.
¾ Select [Utilities].
¾ Select [Printer Setup Utility] and click [Add].
¾ Select Default Browser:
XRX ___________ AppleTalk.
¾ Select [Xerox] from the Print Using drop-down menu.
¾ Select [Xerox WC 4118 series PS] from the model list.
¾ Click [Add].
¾ If prompted, ensure the Installable Options are correct and click [Continue].
¾ Continue with Test Print on page 5-7.
1
2
3
4
5
6
7

Xerox WorkCentre 4118 Specifications

General

Brand	Xerox
Model	WorkCentre 4118
Category	All in One Printer
Language	English