Xerox WorkCentre 7800 series Administrator's Guide

Copying
162 Xerox
®
WorkCentre
®
7800/7800i Series Color Multifunction Printer
System Administrator Guide
Setting Edge Erase Presets
1. At the printer control panel, press the Machine Status button, then touch the Tools tab.
2. Touch Service Settings > Copy Service.
3. Touch Edge Erase Presets.
To create an Edge Erase Preset:
1. Touch Presets, then from the list of presets, touch Available.
2. At the bottom of the window, touch Name, then to enter the name of the new preset, use the touch
screen keyboard.
3. Touch OK.
To edit an existing preset:
1. Touch Presets, then touch the desired preset.
2. Touch Side 1, then to change the amount to erase from each edge, touch the arrows.
3. Touch Side 2, then to change the amount to erase from each edge, touch the arrows , or touch
Mirror Side 1.
4. To change the preset name, touch the name field, type the new name, then touch OK.
5. Touch OK.
Setting Image Shift Presets
1. At the printer control panel, press the Machine Status button, then touch the Tools tab.
2. Touch Service Settings > Copy Service.
3. Touch Image Shift Presets.
4. Touch Presets, then touch the desired preset.
5. For side 1, to change the amount of Up/Down and Left/Right shift, touch the arrows.
6. For side 2, to change the amount of Up/Down and Left/Right shift, touch the arrows, or touch
Mirror Side 1.
7. To change the preset name, touch the name field, type the new name, then touch OK.
8. Touch OK.

Xerox WorkCentre 7800 series Specifications

General

Brand	Xerox
Model	WorkCentre 7800 series
Category	All in One Printer
Language	English