Xerox WorkCentre 7800 series Administrator's Guide

Scanning
Xerox
®
WorkCentre
®
7800/7800i Series Color Multifunction Printer 191
System Administrator Guide
Configuring Scan To Destination
The Scan To Destination feature allows you to associate scan destinations with address book contacts.
Users can select these contacts when scanning using the Scan To feature.
Before You Begin
• Add at least one contact to the Device Address Book.
• Add scan destinations to address book contacts.
For details, see Address Books on page 245.
Configuring Default Scan Settings
1. In Xerox
®
CentreWare
®
Internet Services, click Properties > Services.
2. Click Scan To > Setup.
3. Edit settings as needed. For details, see the Help in Xerox
®
CentreWare
®
Internet Services.
Configuring Default Scan Settings for Address Book
1. In Xerox
®
CentreWare
®
Internet Services, click Properties > Services.
2. Click Scan To > Setup.
3. Click Address Book.
− To configure the Device Address Book settings stored in the printer, click Edit.
− To configure your favorite contacts to appear in the Address Book when you enter a Scan To
function, select View Favorites on Scan To Service Entry.
− To reset the printer to factory settings, click Apply Factory Settings.
4. Click Apply.
Configuring Default Scan Settings for Security
1. In Xerox
®
CentreWare
®
Internet Services, click Properties > Services.
2. Click Scan To > Setup.
3. Click Security.
4. To configure security settings, click Edit.

Xerox WorkCentre 7800 series Specifications

General

Brand	Xerox
Model	WorkCentre 7800 series
Category	All in One Printer
Language	English