DMU-2000 DATA MANAGEMENT UNIT Page 17
HOW TO USE THE WORLD CLOCK
MISCELLANEOUS WORLD CLOCK SETUP OPTIONS
It is possible to change the order of selection of the city times, as well as the display color, etc.
1. On the World Map Screen, press the
[
F4
(
LIST
)]
key
to select the “City Name List” screen.
2. If you want to change the order of the city times as
indicated at the middle of the Display screen, press
the
[
F1
(
)]
or
[
F2
(
)]
keys to move the cursor to
the city name you want to change the position of.
When the
[
F6
(
DOWN
)]
key is pressed, the position
goes downward. If you need to move it further, re-
peat as necessary.
3. If you want to change other settings of a city, select
the city name by pressing the
[
F1
(
)]
or
[
F2
(
)]
keys to highlight the city, then press the
[
F7
(
SELECT
)]
key momentarily. Now the screen will
change to the city setup screen, where the following
settings can be done: “DAYLIGHT SAVING TIME”
(to select Summer time), “DISPLAY MAP” (display
or not display city names on the World Clock screen),
and “HIGHLIGHT” (select yellow or white highlight-
ing indication for cities).
4. If you want to delete a city from the World Clock
screen, move the cursor to the city name by pressing
the
[
F1
(
)]
or
[
F2
(
)]
keys, then press the
[
F4
(
DEL
)]
key.
5. When finished, press and hold in
[
F7
(
SELECT
)]
for
2 seconds to exit.
Advice: On the “DISPLAY MAP” setting, if the city name
indication is selected, the city name will be displayed on
the World Map. When “NO” is selected, the city name
will not be displayed, and only the city name and the cur-
rent time is indicated at the middle of the Display screen.
For the “HIGHLIGHT” setting (city name: highlighted
or not highlighted), if “Highlight” (YES) is selected, the
city name on the world map will be shown in yellow font
color. If “NOT Highlighted” (NO) is selected, the city
name will be indicated in white.
[
F4
(
LIST
)]
Key
[
F4
(
DELETE
)]
Key
“SELECT” Keys
To Next Page
Loading...
Need help?
General
