DMU-2000 DATA MANAGEMENT UNIT Page 45
G
REA T
C
IRCLE
M
AP
/ R
OT A TOR
C
ONTROL
FUNCTION
PRESET MODE
The Preset mode lets you set the desired direction of the rotator in advance, so you can automatically rotate your Yaesu
rotator to the designated direction. Use of a Yaesu Rotator (G-800DXA, G-1000DXA, or G-2800DXA) requires the
connection of the optional T9101556 cable to the connector located on the back of the FT-2000 transceiver.
1. Press the
[
F4
(
MODE
)]
key, as necessary, to select
the “PRESET” mode.
2. Press the
[
F7
(
MAP
)]
key, if necessary, to bring up
the Great Circle Map screen.
3. Press the
[
F2
(
CCW
)]
or
[
F3
(
CW
)]
key to set the
Preset pointer to the direction of the other station's
location.
4. Press the
[
F5
(
START
)]
key to engage hands-free ro-
tation to the beam heading you just set up in the pre-
vious step.
You may stop the rotation manually by pressing the
[
F5
(
START
)]
key again.
“REGULAR COMPASS” D ISPLAY
“GREAT CIRCLE MAP” DISPLAY
To Next Page
Loading...
Need help?
General
