DMU-2000 DATA MANAGEMENT UNIT Page 37
SUMMARY CHECK
You may do a band-by band, mode-by mode, or “all log” summary of your log data.
MODE-BASED SUMMARY CHECK
1. Referring to Figure
on page 31, press the
[
F5
(
SUMMARY
)]
key to bring up the “SUMMARY
MODE” page, and you may then press the
[
F2
(
MODE-
SEL
)]
key and select the desired mode, using the
keyboard’s arrow
([
] or [
])
keys.
2. When you press the
[
F6
(
RUN
)]
key, the summary list
for the selected mode will be displayed.
3. Use the
[
F4
(
)]
and
[
F5
(
)]
keys to scroll through
the summary list.
OPERATOR-BASED SUMMARY CHECK
1. Referring to Figure
on page 31, press the
[
F5
(
SUMMARY
)]
key to brings up the “SUMMARY
MODE” page, then press the
[
F3
(
OP-SEL
)]
key and
then use the keyboard’s arrow
([
] or [
])
keys to
select “ALL-OP” or “CURRENT OP” as desired.
ALL-OP: All log data from all operators reg-
istered on the data stored on the CF
card will be displayed.
CURRENT OP: Only the log data from the current
operator will be displayed.
2. Press the
[
F6
(
RUN
)]
key to display the summary list
for the selected operator, or all operators.
3. Use the
[
F4
(
)]
and
[
F5
(
)]
keys to scroll through
the summary list.
Note: The Summary Check function requires that “NOR-
MAL” be selected as the “Log Type” before you start,
and only logs containing the PREFIX may be used for
this function.
Files saved in either “.CSV” or “.TXT” formats are ca-
pable of letting you perform the “Summary Check” func-
tion.
“SUMMARY MODE” PAGE
LOG BOOK FUNCTION
To Next Page
Loading...
Need help?
General
