Yaesu DMU-2000 User Manual

DMU-2000 DATA MANAGEMENT UNIT Page 49
USING THE MEMORY CHANNEL LIST
LOADING MEMORY DATA
Loading Memory Data from the CF Card to the Memory on the FT-2000.
1. Press the
[
F2
(
LOAD
)]
key to open the memory load-
ing window.
If there are multiple file names stored on the CF card,
select the desired file by pressing the
[
F6
(

)]
key
and
[
F7
(

)]
key.
2. Press the
[
F3
(
GO
)]
key to commence loading of the
memory data to the transceiver. If you wish to cancel
the download, press the
[
F2
(
CANCEL
)]
key.
Advice: When the ERROR message “CF CARD IS NOT
READY” appears on the display, please confirm that the
CF card is inserted correctly into its slot.
When the memory data is loaded from the CF card to the
memory on the , all previous data will be over-
written and the old data will be erased. Please remember
to save the current memory contents to the CF card, if
you want to retrieve it later.

[
F3
(
GO
)]
Key


[
F2
(
LOAD
)]
Key

Yaesu DMU-2000 Specifications

General

Brand	Yaesu
Model	DMU-2000
Category	Transceiver
Language	English