DMU-2000 DATA MANAGEMENT UNITPage 6
PLEASE READ THIS FIRST
6. CORRECTING THE DATE
Use the
[
F1
(
)]
and
[
F2
(
)]
keys to highlight
“DATA,” then press the
[
F7
(
SELECT
)]
key.
Use the
[
F3
(
)]
and
[
F4
(
)]
keys to navigate to each
column of the date, then use the
[
F1
(
)]
and
[
F2
(
)]
keys to select the desired numbers in each column.
Repeat for each column, to complete the date.
When entry is complete, press the
[
F7
(
SELECT
)]
key.
7. TIME SETTING
Press the
[
F1
(
)]
and
[
F2
(
)]
keys to highlight
“TIME,” then press the
[
F7
(
SELECT
)]
key to enter
the time entry mode.
Use the
[
F3
(
)]
and
[
F4
(
)]
keys to navigate to the
desired column in the date, then use the
[
F1
(
)]
and
[
F2
(
)]
keys to select the desired number in each
column. Time is entered in 24-hour format.
8. SETTING UP DAYLIGHT SAVING TIME
Once you have selected the city to be utilized, use the
[
F1
(
)]
and
[
F2
(
)]
keys to highlight “DST” (D
AY -
LIGHT SAV I N G TIME ).
Use the
[
F3
(
)]
and
[
F4
(
)]
keys to choose “ON”
or “OFF.”
9. SAVING AND CLOSING
When you have completed all the above entries to your
satisfaction, press and hold in the
[
F7
(
SELECT
)]
key
for two seconds to save all the new settings. The cho-
sen city and time zone will appear on the World Map
page.
Note: The
[
F1
(
SET
)]
key is only used when setting the
city name and local time. If you make a mistake, press
the
[
F7
(
SELECT
)]
key for 2 seconds. Pressing the
[
F7
(
SELECT
)]
key for two seconds will return you to
the World Map screen.
When entry is complete, press the
[
F7
(
SELECT
)]
key.
To Next Page
Loading...
Need help?
General
