7 - 47
CHAS
3. Check:
• clutch fluid reservoir 1
Cracks/damage → Replace.
• clutch fluid reservoir diaphragm 2
Cracks/damage → Replace.
4. Check:
• clutch hose
Cracks/damage/wear → Replace.
ASSEMBLING AND INSTALLING THE
CLUTCH MASTER CYLINDER
WARNING
WARNING
• Before installation, all internal clutch
components must be cleaned and
lubricated with clean or new clutch
fluid.
• Never use solvents on internal clutch
components.
Recommended clutch fluid
Brake fluid DOT 4
1. Install:
• clutch master cylinder 1
NOTE:
• Install the clutch master cylinder
holder with the “UP” mark facing up.
• Align the end of the clutch master cyl-
inder holder with the punch mark a in
the handlebar.
• First, tighten the upper bolt, then the
lower bolt.
UPUP
1
1
aa
HYDRAULIC CLUTCH
To Next Page
Loading...
Need help?
General
