1 - 24
SPECIAL TOOLS
Rod puller
90890-01437
Rod puller
attachment
90890-01436
Rod puller
Rod puller attachment
These tools are used to pull up the front
fork damper rod.
90890-01441
Fork spring compressor
This tool is used to disassemble or assem-
ble the front fork legs.
90890-01442
Fork seal driver
This tool is used to install the front fork’s
oil seal and dust seal.
90890-01471
Pivot shaft wrench
This tool is used to remove or install the
engine mounting spacer bolts.
90890-01472
Front fork cap bolt wrench
This tool is used to remove or install the
front fork cap bolt.
90890-01473
Damper rod holder
This tool is used to hold the damper rod
assembly when loosening or tightening
the damper rod assembly bolt.
90890-03008
Micrometer (50 ~ 75 mm)
This tool is used to measure the piston
skirt diameter.
90890-03017
Cylinder bore gauge (50 ~ 100 mm)
This tool is used to measure the cylinder
bore.
Vacuum gauge
90890-03094
Vacuum gauge
attachment
90890-03060
Vacuum gauge
Vacuum gauge attachment
This gauge is used to synchronize the
throttle bodies.
Tool No. Tool name/Function Illustration
To Next Page
Loading...
Need help?
General
