Yamaha YZFR7P User Manual

CHASSIS SPECIFICATIONS
SPEC
2 - 14
Steering
Steering bearing type Angular ball bearings ----
Rear suspension
Suspension type Swingarm (link suspension) ----
Rear shock absorber assembly
type
Coil spring/gas-oil damper ----
Rear shock absorber assembly
travel
63 mm (2.48 in) ----
Spring
Free length 160 mm (6.30 in) ----
Installed length 146 mm (5.75 in) ----
Spring rate (K1) 95 N/mm (9.69 kgf/mm, 543 lb/in) ----
Spring stroke (K1) 0 ~ 63 mm (0 ~ 2.48 in) ----
Optional spring available No ----
Standard spring preload gas/air
pressure
1,200 kPa (12 kgf/cm
2
, 171 psi) ----
Spring preload adjusting positions
Minimum 0 [11 mm (0.43 in)] ----
Standard 6 [14 mm (0.55 in)] ----
Maximum 20 [21 mm (0.84 in)] ----
Rebound damping adjusting posi-
tions
Minimum* 50 ----
Standard* 10 ----
Maximum* 0 ----
Compression damping adjusting
positions
Minimum* 25 ----
Standard* 10 ----
Maximum* 0 ----
* from the fully turned-in position
Swingarm
Free play (at the end of the swing-
arm)
Radial ---- 1 mm
(0.04 in)
Axial ---- 1 mm
(0.04 in)
Drive chain
Model (manufacturer) 50ZVM (DAIDO) ----
Link quantity 118 ----
Drive chain slack 40 ~ 50 mm (1.57 ~ 1.97 in) ----
Maximum ten-link section 150.1 mm (5.91 in) ----
Item Standard Limit

Yamaha YZFR7P Specifications

General

Brand	Yamaha
Model	YZFR7P
Category	Motorcycle
Language	English