Technical data
6
- 27
6 Technical data
Type: A10
Types of Mounting: Celling mounted
Degree of freedom: 6
Carrying capacity: 10 kg
Repeatability:
1
1. Tested according to ISO 9283
± 0.08 mm
Power consumption: 2.0 kVA
Weight: 280 kg
Working area main axis:
S-axis (turning) -180° ~ +180°
L-axis (lower arm)
2
2. The range of motion of L, U and R axes is limited depending on their position.
-105° ~ +155°
U-axis (upper arm)² -170° ~ +220°
Working area wrist axis:
R-axis (wrist roll)² -150° ~ +150°
B-axis (wrist yaw/pitch) -90° ~ +135°
T-axis (wrist twist) -210° ~ +210°
Protection class (IP):
Main axes 54
Wrist axis 67
Maximum speed:
S-axis 3.44 rad/s, 197°/s
L-axis 3.32 rad/s, 190°/s
U-axis 3.67 rad/s, 210°/s
R-axis 7.16 rad/s, 410°/s
B-axis 7.16 rad/s, 410°/s
T-axis 10.06 rad/s, 610°/s
Admissible moment (Nm):
3
3. See the following diagram "Moment of arm rating in section 7" for further information on the permissible
moment of inertia.
R-axis 22 Nm
B-axis 22 Nm
T-axis 9.8 Nm
Permissible moment of inertia (kgm²):
R-axis 0.65 kgm²
B-axis 0.65 kgm²
T-axis 0.17 kgm²
Sound pressure level (dB):
4
4. It is measured at maximum load and speed of the robot. The measurement is performed at height of 1.2 m
and 1.5 m above the floor and at distance of 400 mm to the working area.
77 dB
To Next Page
Loading...
Need help?
General