Basic Phone Features
143
To place a mobile call over Bluetooth on your mobile phone:
1. Connect a Bluetooth-Enabled mobile phone with your phone (refer to Pairing and
Connecting the Bluetooth-Enabled Mobile Phone).
2. On your mobile phone, place a call to a desired contact.
The outgoing call information appears on both your IP phone and mobile phone screen.
3. On your mobile phone, select CP960 as your audio source.
Bluetooth: the audio goes through the IP phone.
Handset earpiece or Speaker: the audio goes through the mobile phone.
The audio goes through the IP phone although the mobile phone screen also shows a
connected call. You can hold, mute or end the call on the IP phone, and after you hold the call
you can resume the call or place a new call.
Answering Calls
You can answer a call no matter whether you are in another call or not. If you want to answer a
new incoming call when in another call, ensure that call waiting has been enabled. For more
information on call waiting, refer to Call Waiting on page 162.
Answering When Not in Another Call
To answer a call:
1. Tap Answer.
Answering When in Another Call
To answer a call during a call:
1. Tap .
The incoming call is answered and the original call is placed on hold.
You can also tap Join conf to create a three-way conference with the original call party and
incoming call party.
Answer Calls Automatically
You can enable auto answer to automatically answer an incoming call using the speakerphone.
You can also enable auto answer mute to mute the local microphone when an incoming call is
answered automatically.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
