Yealink CP960 User Manual

User Guide for CP960 IP Phone
50
6. Enter the PPPoE user name and password in the corresponding fields.
7. Tap to accept the change or to cancel.
Note
Wireless Network Settings
Yealink CP960 IP phone supports Wi-Fi feature. The IP phone can be connected to wireless
network if Wi-Fi is available within the area. For more information, contact your system
administrator.
Note
Connecting to the Wireless Network
Three ways to connect CP960 IP phone to the wireless network:
 Manually connect to an available wireless network
 Wi-Fi Protected Setup (WPS)
 Manually add a wireless network
The wrong network settings may result in inaccessibility of your phone and may also have an
impact on your network performance. For more information on these parameters, contact your
system administrator.
Enabling Bluetooth may degrade your wireless network connection. To improve wireless network
performance, you should disable Bluetooth when it is not in use. For more information, refer to
Activating/Deactivating the Bluetooth Mode on page 227.

Yealink CP960 Specifications

General

Control type	Touch
Display type	LCD
Product type	IP conference phone
Voice codecs	CNG, G.722, G.722.1C, G.723, G.726, OPUS, VAD, iLBC
Product color	Stainless steel
Frequency range	2400 - 5000 Hz
Display diagonal	5 \
Display resolution	720 x 1280 pixels
Phonebook capacity	1000 entries
Ethernet interface type	Fast Ethernet
Microphone direction type	Omnidirectional
Supports expansion microphones	Yes
USB connector type	Micro-USB B
RJ-11 ports quantity	1
Cables included	LAN (RJ-45)
Storage temperature (T-T)	-10 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Harmonized System (HS) code	85176990

Weight and Dimensions

Width	338 mm
Height	74 mm
Package depth	392 mm
Package width	405 mm
Package height	141 mm