Yealink CP960 User Manual

User Guide for CP960 IP Phone
172
The system establishes the call between phone C and B.
Note
Call Pickup
You can use call pickup to answer someone else’s incoming call on your phone. The CP960 IP
phone supports directed call pickup and group call pickup. Directed call pickup is used for
picking up a call that is ringing at a target phone number. Group call pickup is used for picking
up a call that is ringing at any phone number in a certain group. The pickup group should be
predefined, contact your system administrator for more information.
You can pick up an incoming call by tapping DPickup/GPickup on the dialing screen. To use
call pickup, you need to configure the call pickup code beforehand on a global or per-line basis
via web user interface. The call pickup code configured on a per-line basis takes precedence
over that configured on a global basis.
Note
Directed Call Pickup
To enable directed call pickup and configure the directed call pickup code on a global
basis via web user interface:
1. Click on Features->Call Pickup.
2. Select Enabled from the pull-down list of Directed Call Pickup.
3. Enter the directed call pickup code in the Directed Call Pickup Code field.
4. Click Confirm to accept the change.
The call park code and call park retrieve code are predefined on the system server. Contact your
system administrator for more information.
If the parked call is not retrieved within a period of time assigned by the system, the phone
performing call park will receive a call back.
If there are many incoming calls at the same time, tapping GPickup on the phone will pick up the
call that rings first.

Yealink CP960 Specifications

General

Control type	Touch
Display type	LCD
Product type	IP conference phone
Voice codecs	CNG, G.722, G.722.1C, G.723, G.726, OPUS, VAD, iLBC
Product color	Stainless steel
Frequency range	2400 - 5000 Hz
Display diagonal	5 \
Display resolution	720 x 1280 pixels
Phonebook capacity	1000 entries
Ethernet interface type	Fast Ethernet
Microphone direction type	Omnidirectional
Supports expansion microphones	Yes
USB connector type	Micro-USB B
RJ-11 ports quantity	1
Cables included	LAN (RJ-45)
Storage temperature (T-T)	-10 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Harmonized System (HS) code	85176990

Weight and Dimensions

Width	338 mm
Height	74 mm
Package depth	392 mm
Package width	405 mm
Package height	141 mm