Yealink CP960 User Manual

Customizing Your Phone
69
You can also long tap the space key on the onscreen keyboard to change the input method:
The following takes Android Keyboard (AOSP) – English (US) input method as example:
Note
Time & Date
There are three ways to view the time and date via phone user interface:
 Viewing phone’s time on the status bar.
 Viewing phone’s time and date by digital clock (refer to Clock).
 Viewing phone’s time and date in the control center.
You can configure the phone to obtain the time and date from the SNTP server automatically, or
configure the time and date manually. If the phone cannot obtain the time and date from the
Simple Network Time Protocol (SNTP) server, contact your system administrator for more
information.
To configure the SNTP setting via phone user interface:
1. Tap Settings from the Home screen.
2. Tap Time & Date from the Basic block.
3. Tap General.
4. Tap the Type field.
5. Tap SNTP Settings in the pop-up dialog box.
6. Tap the Time Zone field.
7. Tap the time zone that applies to your area in the pop-up dialog box.
The default time zone is “+8”.
8. Enter the domain name or IP address of SNTP server in the NTP Server1 and NTP Server2
field respectively.
Input method is configurable via phone user interface only.

Yealink CP960 Specifications

General

Control type	Touch
Display type	LCD
Product type	IP conference phone
Voice codecs	CNG, G.722, G.722.1C, G.723, G.726, OPUS, VAD, iLBC
Product color	Stainless steel
Frequency range	2400 - 5000 Hz
Display diagonal	5 \
Display resolution	720 x 1280 pixels
Phonebook capacity	1000 entries
Ethernet interface type	Fast Ethernet
Microphone direction type	Omnidirectional
Supports expansion microphones	Yes
USB connector type	Micro-USB B
RJ-11 ports quantity	1
Cables included	LAN (RJ-45)
Storage temperature (T-T)	-10 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Harmonized System (HS) code	85176990

Weight and Dimensions

Width	338 mm
Height	74 mm
Package depth	392 mm
Package width	405 mm
Package height	141 mm