Yealink CP960 User Manual

Basic Phone Features
171
either a voice prompt confirming that the call was parked, or a visible prompt on the touch
screen.
Note
To configure a call park key via phone user interface:
1. Tap Settings from the Home screen.
2. Tap DSS Keys from the Features block.
3. Tap the desired line key.
4. Tap the Type field.
5. Tap Key Event in the pop-up dialog box.
6. Tap the Key Type field.
7. Tap Call Park in the pop-up dialog box.
8. Tap the Account ID field.
9. Tap the desired line in the pop-up dialog box.
10. (Optional.) Enter the string that will appear on the touch screen in the Label field.
11. Enter the call park code in the Value field.
12. Tap to accept the change or to cancel.
Call park key is configurable via web user interface at the path DSSKey->Line Key.
To use call park:
1. User on phone A places a call to phone B.
2. User on phone A wants to take the call in a conference room for privacy, and so taps the
call park key on phone A.
3. User on phone A walks to an available conference room where the phone is designated as
phone C. The user dials the call park retrieve code to retrieve the parked call.
Call park is not available on all servers. Contact your system administrator for more information.

Yealink CP960 Specifications

General

Control type	Touch
Display type	LCD
Product type	IP conference phone
Voice codecs	CNG, G.722, G.722.1C, G.723, G.726, OPUS, VAD, iLBC
Product color	Stainless steel
Frequency range	2400 - 5000 Hz
Display diagonal	5 \
Display resolution	720 x 1280 pixels
Phonebook capacity	1000 entries
Ethernet interface type	Fast Ethernet
Microphone direction type	Omnidirectional
Supports expansion microphones	Yes
USB connector type	Micro-USB B
RJ-11 ports quantity	1
Cables included	LAN (RJ-45)
Storage temperature (T-T)	-10 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Harmonized System (HS) code	85176990

Weight and Dimensions

Width	338 mm
Height	74 mm
Package depth	392 mm
Package width	405 mm
Package height	141 mm