Yealink CP960 User Manual

User Guide for CP960 IP Phone
148
International). This feature is enabled by default. Incoming calls from some authorized numbers
not to be forwarded when the call forward feature is enabled. The incoming call will not be
logged in the Forwarded Calls list. This feature is disabled by default.
Note
Forwarding an Incoming Call to a Contact
You can forward an incoming call directly to a contact without answering the call.
To forward an incoming call to a contact:
1. Tap .
2. Enter the number you want to forward the incoming call to.
3. Tap FWD.
The touch screen prompts a call forward message.
Forwarding All Incoming Calls to a Contact
You can set up the IP phone to forward all incoming calls to a contact.
To forward all incoming calls to a contact:
1. Tap Settings from the home screen.
2. Tap Call Forward from the Features block.
Call forward is local to the phone, and may be overridden by the server settings. For more
information, contact your system administrator.
If DND feature is enabled, the incoming calls will not be forwarded even if you configure no
answer forward feature.
When the phone forwards a call, a prompt window will pop up by default. If you want to disable
the feature, contact your system administrator for more information.

Yealink CP960 Specifications

General

Control type	Touch
Display type	LCD
Product type	IP conference phone
Voice codecs	CNG, G.722, G.722.1C, G.723, G.726, OPUS, VAD, iLBC
Product color	Stainless steel
Frequency range	2400 - 5000 Hz
Display diagonal	5 \
Display resolution	720 x 1280 pixels
Phonebook capacity	1000 entries
Ethernet interface type	Fast Ethernet
Microphone direction type	Omnidirectional
Supports expansion microphones	Yes
USB connector type	Micro-USB B
RJ-11 ports quantity	1
Cables included	LAN (RJ-45)
Storage temperature (T-T)	-10 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Harmonized System (HS) code	85176990

Weight and Dimensions

Width	338 mm
Height	74 mm
Package depth	392 mm
Package width	405 mm
Package height	141 mm