Yealink MeetingEye 400 Administrator's Guide

| Configuring Account Settings | 93
Parameter Description Configuration Method
Port
Configure the SNMP port.
Note: the value can be any integer
from 1 to 65535. The default value is
161.
If you change this parameter, the
system will reboot to make the change
take effect.
Web user interface
Trusted Address Configure the IP address or domain
name of the SNMP server.
Note: if you change this parameter, the
system will reboot to make the change
take effect.
Web user interface
Configuring Account Settings
This chapter provides information on how to configure account settings.
• Setting SIP Account/SIP IP Call
• Setting H. 323 Account/H.323 IP Call
• Configuring the Video Conference Platform Account
• Configuring Quick Switch Platform
• Logging out of the Video Conference Platform
Setting SIP Account/SIP IP Call
Yealink video conferencing system supports Session Initiation Protocol (SIP). If your server supports SIP,
you can make a voice/video call using the SIP account or IP address.
About this task
This feature is not applicable to the third generation VCS devices running in Yealink Cloud system mode.
• Configuring SIP Accounts
• Configuring SIP IP Call
Configuring SIP Accounts
Yealink video conferencing system supports Session Initiation Protocol (SIP). If your server supports SIP,
you can configure a SIP account for your device, and other users can call you by dialing your SIP account.
About this task
This feature is not applicable to the third generation VCS devices running in Yealink Cloud system mode.

Yealink MeetingEye 400 Specifications

General

Brand	Yealink
Model	MeetingEye 400
Category	Conference System
Language	English